Networking cable Lanberg PCF6-20CC-0050-S RJ-45 Cat6 0.5 m Grey

Lanberg PCF6-20CC-0050-S is a Cat6 RJ-45 networking cable 0.5 m long designed for reliable data transmission at speeds up to 10 Gbps. The cable uses F/UTP (foil) shielding to reduce electromagnetic interference and has conductors made of CCA with a PVC sheath. Its compact 0.5 m length and grey RAL7035 colour make it suitable for short patching runs in home and professional networks.

Advantages

The cable complies with ANSI/TIA/EIA-568-B and ISO/IEC 11801 class E requirements and supports frequencies up to 250 MHz. With 26 AWG conductors (7 x 0.16 mm) and an outer diameter of approximately 5.7 mm, the Lanberg patchcord delivers stable performance in environments where reduced interference is important. F/UTP shielding improves signal quality compared with unshielded variants while the RJ-45 connectors ensure compatibility with standard network equipment.

Suitable for

• Connecting routers, switches and patch panels for short link runs
• Linking servers or desktop computers to nearby network ports
• Home office and small office network patching

Key specifications

• Category: Cat6 (ICT category 6)
• Shielding: F/UTP (foil shielding)
• Length: 0.5 m
• Conductors: CCA, 26 AWG (7 x 0.16 mm)
• Outer diameter: 5.7 mm ±0.2 mm
• Sheath material: PVC
• Colour: Grey (RAL7035)
• Frequency: up to 250 MHz
• Bandwidth / data rate: up to 10 Gbps
• Standards: ANSI/TIA/EIA-568-B; ISO/IEC 11801 class E

How to use

Plug one RJ-45 connector into the network device (router, switch, server or computer) and the other connector into the corresponding port or patch panel. Ensure connectors are fully seated and avoid sharp bends near the terminations. Use the 0.5 m length for short patching runs inside racks, between adjacent devices or for tidy desk setups.

Recommendations

For best performance, keep the cable away from strong electromagnetic sources and avoid excessive bending. Use this Cat6 F/UTP patchcord for short-distance connections where shielding is required to reduce interference; for longer links consider using certified permanent link cabling or fiber where appropriate.