Kingston Server Premier - DDR4 - Modul - 16 GB - DIMM 288-PIN - 3200 MHz / PC4-25600 - CL22 - 1.2 V - ungepuffert - ECC (KSM32ES8/16MF)

Kingston KSM32ES8/16MF is a 16GB DDR4-3200 ECC 288-pin DIMM designed for PC and server systems. The module is built as 2G x 72-bit (1Rx8) using nine 2G x 8-bit FBGA components and is programmed to JEDEC DDR4-3200 timings of 22-22-22 at 1.2V with gold contact fingers.

Advantages

This Kingston memory module provides error-correcting code (ECC) support for improved data integrity, a 3200 MHz clock speed for higher throughput compared with lower-frequency DDR4 modules, and a standard 288-pin DIMM form factor for compatibility with many desktop and server motherboards. JEDEC-standard SPD programming ensures the module operates at specified DDR4-3200 timings (CL22) and 1.2V.

Suitable for (tasks / use cases)

• Server memory upgrades requiring ECC protection
• Workstations and desktops used for multitasking and memory-intensive applications
• Systems that accept 288-pin DDR4 DIMMs and run at 3200 MHz or negotiate JEDEC timings

Key specifications

• Capacity: 16 GB
• Type: DDR4 SDRAM
• Speed: 3200 MHz (DDR4-3200)
• CAS Latency: CL22 (22-22-22)
• Form factor: 288-pin DIMM
• Module organization: 2G x 72-bit (1Rx8), built from nine 2G x 8-bit FBGA components
• Voltage: 1.2 V
• ECC support: Yes
• Manufacturer part number (MPN): KSM32ES8/16MF

How to use

Power off the system and unplug it before installing the DIMM. Open the chassis, locate the appropriate 288-pin DDR4 DIMM slot, and align the module's notch with the slot key. Insert the module vertically and press until the retention clips snap into place. After installation, power on the system and verify memory recognition in BIOS/UEFI or the operating system. Ensure the motherboard supports ECC and the intended speed; some systems may default to JEDEC timings.

Recommendations

Install modules in matched pairs or according to the motherboard vendor's memory population guidelines for optimal performance. For server use, confirm ECC compatibility with the motherboard or controller. Avoid mixing different speeds or voltages to prevent instability.