MEAN WELL XLC-60-48-MAS 60W 48V Constant Voltage LED Driver with 3-in-1 Dimming, IP67

LED installations in damp or dusty environments need a power supply that can handle moisture, temperature swings and fluctuating mains voltage without failing. The MEAN WELL XLC-60-48-MAS is a 60 W constant-voltage LED driver that delivers a stable 48 V DC output with 3-in-1 dimming, so you can adjust brightness with a 0-10 V signal, PWM or a simple resistor. Its IP67-rated plastic housing keeps out water and dust, making it suitable for outdoor and industrial lighting projects.

Who is it for

This driver is for electricians, lighting designers and OEMs who build or maintain LED fixtures in challenging locations—think facade lighting, signage, horticultural setups or wet-area luminaires. It works with 48 V LED modules that require up to 1.25 A, and the dimming options give you flexibility for smart lighting controls or manual tuning.

Main features

• 60 W output power at 48 V DC, 1.25 A constant voltage
• 3-in-1 dimming: 0-10 VDC, PWM signal, or resistance
• Wide AC input range: 180–295 VAC (also accepts 254–417 VDC)
• IP67-rated plastic housing for dust-tight and temporary immersion protection
• High efficiency up to 88% and power factor >0.95 at 230 VAC full load
• Built-in protections: short circuit, overload, over voltage, over temperature
• Operating case temperature from -40°C to +85°C

Specifications

• Output power: 60 W
• Output voltage: 48 V DC
• Output current: 1.25 A
• Input voltage: 180–295 VAC / 254–417 VDC
• Dimming: 3-in-1 (0-10V, PWM, resistance)
• Efficiency: 88%
• Power factor: >0.95 at 230 VAC, full load
• Ripple & noise: 150 mVp-p
• Setup time: 500 ms at 230 VAC
• Housing material: plastic
• Cooling: free air convection
• IP rating: IP67
• Operating temperature (case): -40°C to +85°C
• Safety standards: UL8750, ENEC EN61347-1, EN61347-2-13
• Harmonic current: EN61000-3-2 Class C

Tips

When wiring the dimming input, use a shielded cable for 0-10 V signals to avoid interference. Mount the driver with the cable glands facing downward so condensation cannot collect near the entry points. For outdoor use, ensure the mating connectors are also IP67-rated to maintain the enclosure's protection.