Masking Tape 3M Beige 48mm x 50m 101E/48MMX50M

Masking Tape 3M Beige 48mm x 50m 101E/48MMX50M is a crepe paper masking tape with a rubber-based adhesive designed for holding, bundling, sealing and non-critical masking tasks. The tape is 48 mm wide and 50 m long, with a backing saturated to allow easy tear and resist slivering. It is intended for indoor use and offers reliable adhesion with minimal residue when removed.

Advantages

The crepe paper backing provides conformability for curved and uneven surfaces while the rubber adhesive gives instant tack and good holding power to resist lifting and curling. A special back-side treatment controls unwind to reduce waste, and the backing saturation makes the tape easy to tear by hand.

Suitable for

• Painting and creating clean paint lines on interior surfaces
• General sealing and bundling tasks indoors
• DIY and craft projects requiring easy removal without residue
• Temporary holding and masking where outdoor exposure is not required

Key specifications

• Brand: 3M
• Model / MPN: 101E/48MMX50M
• EAN: 2050004718843
• Width: 48 mm
• Length: 50 m
• Backing: Crepe paper, saturated for easy tear
• Adhesive: Rubber-based, instant adhesion
• Intended use: Indoor only
• Temperature performance: 30°C for 1 hour
• Shelf life: 12 months from date of manufacture (store in clean, dry place)

How to use

Ensure the surface is clean, dry and free of dust or loose particles. Cut or tear the required length of tape and apply firmly along the edge or area to be masked, pressing down to secure adhesion. Remove the tape after the job is complete—preferably within the manufacturer's recommended time frame—to reduce the risk of adhesive residue; peel back slowly at a low angle for best results.

Recommendations

Store rolls in a clean, dry environment and use within 12 months from the date of manufacture. Not suitable for prolonged outdoor exposure or high-temperature applications beyond 30°C for 1 hour.