Lindy 3m Ultra High Speed HDMI Cable, Gold Line

The Lindy 3m Ultra High Speed Gold Line HDMI Cable is a professional-grade HDMI 2.1 cable designed for high-bandwidth video and audio transmission. This 3 m grey cable features male HDMI Type A connectors on both ends, 24K gold-plated contacts and a triple-shielded construction with 30AWG OFC conductors to provide corrosion resistance, reliable signal integrity and low attenuation for long runs. It supports up to 48 Gbit/s bandwidth in lengths up to 5 m and can carry resolutions up to 10K (10240x4320@120Hz 4:2:0 12-bit) as well as high-bit-rate 32-channel audio and Dolby Atmos.

Advantages

Gold Line Ultra High Speed HDMI cables combine 24K gold-plated contacts, triple shielding and oxygen-free copper (OFC) conductors to reduce signal loss and resist corrosion. The cable’s low-attenuation design and HDMI 2.1 compliance ensure stable transmission of high-resolution video and multi-channel audio, while support for 48 Gbit/s bandwidth enables advanced features such as VRR, ALLM, Dynamic HDR, DSC and eARC where supported by source and display devices.

Suitable for

• High-resolution home cinema systems and AV setups
• Gaming consoles and gaming PCs requiring low-latency, high-frame-rate signals
• Professional displays and presentation systems demanding reliable long-run connections
• Audio setups using Dolby Atmos or multi-channel high-bit-rate audio

Key specifications

• Length: 3 m
• Connectors: HDMI Type A (male) – both ends
• Standard: HDMI 2.1, up to 48 Gbit/s (in cable lengths up to 5 m)
• Supported resolution: Up to 10K 10240x4320@120Hz (4:2:0, 12-bit) with DSC; 8K120Hz without DSC
• Audio: High bit-rate 32-channel audio, Dolby Atmos, eARC support
• Construction: Triple-shielded, 30AWG OFC conductors, 24K gold-plated contacts
• Colour: Grey
• MPN / EAN: 37603 / 4002888376037

How to use

Connect one end of the Lindy 3m Ultra High Speed Gold Line HDMI Cable to the HDMI output of your source device (for example a Blu-ray player, gaming console or PC graphics card) and the other end to the HDMI input of your display or AV receiver. Ensure connectors are fully seated. For features such as VRR, ALLM, Dynamic HDR or eARC, enable the corresponding settings on both source and display devices and use compatible hardware and firmware.

Recommendations

For best performance, keep cable runs within the recommended length for full 48 Gbit/s bandwidth (up to 5 m). Use certified HDMI 2.1-capable devices and updated firmware to take advantage of features like DSC, VRR, ALLM and eARC. Avoid tight bends and sharp kinks; route the cable away from high-power mains cables or strong electromagnetic sources to minimise interference.