Lindy 15m Fibre Optic Hybrid Micro-HDMI 8K60 LSZH Cable with Detachable HDMI Connectors (38541)

Long-distance 8K HDMI connectivity often forces a compromise between signal integrity and cable flexibility. The Lindy 38541 solves this with a hybrid fibre optic design that carries 48Gbps over 15 metres without repeaters or signal loss, while detachable connectors let you route the slim cable through tight conduits before attaching full-size HDMI plugs.

Who is it for

Professional AV installers, home cinema enthusiasts, and IT integrators who need to run ultra-high-definition video across large rooms, through walls, or between equipment racks. It is equally suited to gaming setups where 4K120 or 8K60 must travel from a PC or console to a display far away.

Main features

• True HDMI 2.1 bandwidth: 48Gbps supports 8K@60Hz 4:4:4 and 4K@120Hz 4:4:4
• Hybrid construction: four OM3 glass fibres for video/data, seven copper wires for low-speed control and power
• Detachable HDMI Type A connectors on both ends, with Micro-HDMI Type D internal interfaces for easy pulling through 20mm conduits
• LSZH (Low Smoke Zero Halogen) jacket for safe use in public buildings and plenum spaces
• Supports HDR10, HLG, Dolby Vision, HDCP 2.3, and eARC for object-based audio
• Directional design with clearly marked Source and Display ends; self-powered via HDMI with optional Micro-USB power for weak ports

Specifications

• Length: 15m
• HDMI standard: 2.1
• Max resolution: 8K@60Hz (4:4:4 8-bit), 4K@120Hz (4:4:4 8-bit)
• Bandwidth: 48Gbps
• Connectors: detachable HDMI Type A male to detachable HDMI Type A male (internal Micro-HDMI Type D)
• Cable diameter: approx. 4.8mm
• Jacket material: LSZH
• Colour: black
• Operating temperature: 0°C to 50°C
• Storage temperature: -20°C to 70°C
• Compliance: CE, FCC, RoHS, REACH

Tips

Before pulling the cable, remove the detachable HDMI ends and attach a draw wire to the Micro-HDMI tip. If your source device cannot provide enough power, connect a standard 5V Micro-USB charger to the marked power port on the Source end. Always verify the Source/Display orientation before final installation, as the cable is directional.