LED driver Synergy21 MEAN WELL LPV-150-24, 24V DC, 151.2W, AC 180–305V, 47–63Hz, 63×191×37.5 mm

Synergy21 MEAN WELL LPV-150-24 is a constant-voltage LED driver that delivers 24 V DC output with a maximum power of 151.2 W. It is designed for AC input ranging from 180 to 305 V at 47–63 Hz and comes in a compact metal housing measuring 63 × 191 × 37.5 mm. The unit is intended to provide a stable 24 V supply for LED strips, luminaires and other low-voltage LED installations in indoor and protected outdoor locations.

Advantages

The LPV-150-24 offers a high output power density in a compact metal enclosure, enabling installation in space-constrained fixtures or mounting locations. Its wide AC input range supports use with different mains voltages and fluctuating supply conditions. The design is suitable for dry, damp and wet locations when installed appropriately, and the constant-voltage output simplifies connection to LED strips and multiple luminaires without requiring additional regulation.

Suitable for

• Powering 24 V LED strips and tape lighting in architectural and accent lighting
• Supplying multiple 24 V luminaires in commercial or retail installations
• LED moving sign applications and other signage requiring stable 24 V DC
• Indoor and protected outdoor installations where IP67-rated equipment is acceptable

Key specifications

• Output voltage: 24 V DC
• Maximum output power: 151.2 W
• Input voltage range: AC 180–305 V
• Input frequency: 47–63 Hz
• Enclosure material: metal housing
• Dimensions: 63 × 191 × 37.5 mm
• Protection rating suitable for dry, damp and wet locations (IP67 design)
• Constant-voltage operation for LED lighting applications

How to use

Install the LPV-150-24 according to local electrical codes, ensuring the unit is mounted in a location that meets the specified protection requirements for the installation environment. Connect the AC mains input within the 180–305 V range and verify correct polarity on the DC 24 V output before powering connected LED loads. Size the wiring and connectors to handle the driver’s maximum current and use appropriate overcurrent protection as required by the application. Allow adequate ventilation around the metal housing and avoid covering the unit to prevent overheating.

Recommendations

For optimal performance and longevity, match the total LED load to not exceed the 151.2 W rating, distribute multiple luminaires across appropriate runs, and secure the driver in a location that protects it from direct exposure while preserving airflow. Verify compatibility of LED modules with a 24 V constant-voltage supply and follow manufacturer instructions for both driver and LED products during installation.