LANBERG networking cable Cat6 F/UTP RJ-45 — 150 m, grey, model PCF6-10CC-1500-S

Patch cable Category 6 FTP (shielded) with overall length 15 m and grey RAL7035 jacket. The cable uses AWG 26 conductors (8 × 7 × 0.16 mm) with cord stranding 7 × 0.16 mm, HDPE conductor insulation of 0.88 mm and LDPE cross filler. Shielding includes polyester tape and aluminum foil plus a drain wire made of 7 × 0.16 mm CCA. External PVC insulation thickness is 5.7 mm. The cable supports operation up to 250 MHz and is compatible with ANSI/TIA/EIA-568B standards. Supplied in a string bag.

Advantages

The shielded FTP design with aluminum foil and drain wire reduces electromagnetic interference for more stable network signals. Category 6 specification and 250 MHz bandwidth provide support for high-speed Ethernet links. Construction details such as HDPE conductor insulation, LDPE cross filler and polyester tape improve signal consistency and mechanical stability. A 15 m length and grey RAL7035 jacket make the cable suitable for visible runs and standard patching requirements.

Suitable for

• Ethernet patching in offices and data closets
• Connecting switches, routers and patch panels
• Short to medium horizontal runs requiring shielding
• Environments with potential electromagnetic interference

Key specifications

• Cable category: Cat6 FTP (shielded)
• Length: 15 m
• Conductor AWG/structure: AWG 26 (8 × 7 × 0.16 mm), cord 7 × 0.16 mm
• Conductor insulation: HDPE, 0.88 mm
• Core filler: LDPE cross filler
• Shielding: polyester tape + aluminum foil
• Drain wire: 7 × 0.16 mm CCA
• Outer jacket: PVC, 5.7 mm
• Colour: grey RAL7035
• Frequency range: up to 250 MHz
• Standards compatibility: ANSI/TIA/EIA-568B
• Packaging: string bag

How to use

Terminate the cable with compatible RJ-45 connectors or use pre-terminated patch cords as required. Route the cable avoiding sharp bends and strong mechanical stress; maintain appropriate bend radius during installation. Ground the shielding and connect the drain wire to the system ground to ensure effective EMI protection. Test the terminated links with a network cable tester to verify continuity and performance up to Cat6 parameters.

Recommendations

For optimal performance, keep cable runs under recommended maximum lengths for the supported application, ensure proper grounding of the foil shield, and avoid running the cable parallel to power lines. Use the cable in indoor environments and protect from excessive moisture and heat to maintain signal integrity.