HDMI cable DELOCK 81692 — 3 m, HDMI Type A (Standard) to HDMI Type D (Micro), 48 Gbit/s, up to 7680×4320, gold-plated contacts, black

The Delock HDMI cable model 81692 is a 3 m connection cable with a standard HDMI Type A male plug and a Micro HDMI Type D male plug. With support for up to 48 Gbit/s bandwidth it can carry signals for up to 8K Ultra HD (7680 × 4320 @ 60 Hz) and is suitable for connecting cameras, tablets or devices with a Micro HDMI output to TVs or monitors with a full-size HDMI input. The cable is black and features gold-plated contacts for improved contact reliability.

Advantages

This cable supports a high data rate of up to 48 Gbit/s and thus high resolutions and high frame rates, including 8K @ 60 Hz and various 4K/120–240 Hz modes depending on the connected hardware. It is triple-shielded with a 36 AWG coaxial design and gold-plated contacts to reduce interference and improve signal stability. Dynamic HDR and Dolby Vision compatibility deliver improved colour, contrast and brightness reproduction, while eARC support enables lossless audio transmission to a connected sound system.

Suitable for

• Connecting cameras or tablets with Micro HDMI output to TVs or monitors
• Home cinema setups requiring high-resolution video and uncompressed audio via eARC
• Gaming systems that benefit from high frame rates and VRR/Game Mode support
• Content playback or editing workflows that require 8K or high-refresh 4K output

When it may not be suitable

This cable requires devices that support the corresponding HDMI feature set and bandwidth to achieve the listed resolutions and frame rates. If either the source device or the display does not support the higher HDMI specifications (for example 8K, DSC or eARC), the achievable resolution or audio features will be limited to what the hardware permits.

Key specifications

• Cable length: 3 m
• Connectors: HDMI Type A (Standard) male — HDMI Type D (Micro) male
• Maximum data rate: up to 48 Gbit/s
• Maximum supported resolution: up to 7680 × 4320 @ 60 Hz (dependent on connected hardware)
• Cable construction: coaxial, 36 AWG, triple shielded
• Cable diameter: approx. 3.3 mm
• Contacts: gold-plated
• Supported formats and features: Dynamic HDR, Dolby Vision, DSC 1.2, 21:9 aspect ratio, 3D, 1080p HFR
• Audio features: eARC support, up to 32 audio channels, up to 1536 kHz sampling, Dolby TrueHD and DTS-HD Master Audio support
• Colour: Black

How to use

Connect the Micro HDMI Type D plug to the device with a Micro HDMI output (for example a camera or tablet) and insert the HDMI Type A plug into the HDMI input of the TV or monitor. Ensure both devices are powered on and select the correct HDMI input on the display. To use advanced features such as eARC, HDR or high refresh rates, enable the corresponding settings on both source and display devices and verify that both sides support the required HDMI versions and modes.

What to consider before purchase

• Verify that both source and display support the desired resolution, refresh rate and HDMI features (e.g., 8K, DSC, eARC, Dolby Vision)
• Check that the device has a Micro HDMI (Type D) port rather than another micro/mini connector
• Consider cable length and routing needs for your setup (this cable is 3 m long)

Recommendations

For best results, use this cable with devices that explicitly support high-bandwidth HDMI features; enable HDR and audio passthrough/eARC in device menus when connecting to AV receivers or soundbars to preserve full audio and video quality.