Ultraviolet Sterilizer Alcasa UVC-0001 White

The Ultraviolet Sterilizer Alcasa UVC-0001 White is a freestanding UV-C sterilization unit designed for continuous and periodic disinfection of air and exposed surfaces in indoor environments. Equipped with a UV-C lamp that emits at a germicidal wavelength of 253.7 nm and rated at 60 W, the unit is intended for professional and semi-professional spaces where reducing microbial load is required. The device is powered from standard AC mains (110–230 V) and has a vertical design with a height of 2000 mm and a weight of 10 kg to provide broad coverage in rooms with typical ceiling heights.

Advantages

The Alcasa UVC-0001 delivers targeted germicidal action through a UV-C lamp, effective against bacteria, viruses and certain spores when used under appropriate conditions. Its 60 W output and 253.7 nm wavelength match common germicidal standards for inactivating microorganisms on exposed surfaces and in the air. The tall, freestanding form factor enables placement in larger rooms without requiring permanent installation, and AC operation across 110–230 V supports flexible use in varied electrical environments.

Suitable for (tasks / use cases)

• Disinfection of medical examination rooms, clinics and dental offices between patient visits
• Air and surface sterilization in laboratories and research spaces where rapid decontamination is needed
• Sanitizing common areas such as waiting rooms, break rooms and reception areas after hours
• Use in food processing zones, packing areas and cold storage where surface microbial control is required
• Temporary or supplemental sterilization in school classrooms, daycare facilities and other public spaces

Key specifications

• UV-C wavelength: 253.7 nm
• Lamp power: 60 W
• Power supply: AC 110–230 V
• Form factor: freestanding vertical unit
• Height: 2000 mm
• Weight: 10 kg
• Lamp type: UV-C germicidal lamp

How to use

Position the unit in the center or a suitable location within the room to maximize line-of-sight exposure to surfaces and air. Ensure that the area is vacated by people, animals and plants before activating the UV-C lamp, and follow local safety procedures for UV disinfection. Connect the unit to a compatible AC mains supply (110–230 V) using the provided power lead, set the required run time according to room size and contamination level, and start the sterilization cycle. After the cycle completes, allow any ozone or residual UV effects to dissipate and ventilate the space if necessary before re-entering.

Recommendations

Use the Ultraviolet Sterilizer Alcasa UVC-0001 White only in unoccupied spaces and follow applicable safety standards and regulations for UV-C equipment. Regularly inspect and replace the UV-C lamp according to the manufacturer's guidance to maintain effective germicidal output, and perform routine cleaning of external surfaces. Combine UV-C sterilization with conventional cleaning and disinfection protocols for comprehensive hygiene control.