Fluke FLK-TIS60+ 9HZ Thermal Imaging Camera 320x240, 9 Hz, -20°C to 550°C 5133402

Electrical and mechanical faults often hide behind temperature anomalies invisible to the naked eye. The Fluke TiS60+ thermal imager reveals these hot spots and cold zones instantly, turning a 320 x 240 infrared sensor into clear, actionable images. With a thermal sensitivity of 45 mK and a measurement range from -20 °C to 550 °C, it catches subtle temperature differences across motors, panels, and pipes.

Who is it for

Maintenance technicians, electricians, and HVAC professionals who need a rugged, high-resolution thermal camera for routine inspections and troubleshooting. The manual focus and 34° x 24° field of view make it suitable for both close-up and mid-range targets.

Main features

• 320 x 240 infrared resolution (76,800 pixels) for detailed thermal images
• Thermal sensitivity (NETD) ≤ 0.045 °C at 30 °C
• Temperature range: -20 °C to 550 °C (-4 °F to 1022 °F)
• Manual focus with minimum focus distance of 0.15 m
• 3.5-inch LCD display (320 x 240 pixels)
• 9 Hz refresh rate
• 5-megapixel visible light camera with IR-Fusion™ technology (AutoBlend™, picture-in-picture)
• 4 GB internal storage plus micro SD card slot (up to 32 GB)
• Wi-Fi connectivity for Fluke Connect®
• Drop tested to 2 meters; IP54 rated

Specifications

• Infrared resolution: 320 x 240 pixels
• Thermal sensitivity (NETD): ≤ 0.045 °C (45 mK) at 30 °C
• Temperature measurement range: -20 °C to 550 °C
• Field of view: 34° H x 24° V
• Spatial resolution (IFOV): 1.86 mRad
• Focus: Manual, minimum distance 0.15 m
• Display: 3.5 inch LCD, 320 x 240 pixels
• Refresh rate: 9 Hz
• Digital camera: 5 megapixels
• Image modes: IR-Fusion™ (AutoBlend™), picture-in-picture, full IR, full visible light
• Storage: 4 GB internal, micro SD card slot (up to 32 GB)
• Battery life: 3.5+ hours (standard battery)
• Connectivity: USB 2.0, Wi-Fi (Fluke Connect)
• Drop test: 2 meters
• IP rating: IP54
• Spectral band: 8 μm to 14 μm
• Emissivity correction: Adjustable (0.01 to 1.00) or predefined material list

Tips

For accurate readings, set the emissivity to match the target surface, or use the predefined material list. Keep the lens clean and protected when not in use. Use Fluke Connect to share images and reports from the field.