Flooring tool Wolfcraft 6975000 for laminate and parquet, grey, pack of 3

The Wolfcraft Flooring Tool (model WF6975000) is a three-piece set for laying laminate and design flooring. The kit includes a tapping block, a pulling ledge and 30 universal wedges. The tapping block has a longitudinal profile that protects tongue-and-groove joints while enabling targeted hammer blows to pull planks tightly together. The metal pulling ledge is intended for use near walls: position it in the gap between wall and board and tap it in the pulling direction to align the rows. Thirty reusable plastic wedges create a constant expansion gap around the floor and can be combined to form either a flat spacer or a larger wedge.

Advantages

The tapping block’s special geometry fits common plank thicknesses and protects the locking system during installation. The pulling ledge is robust thanks to its metal construction and has three felt pads underneath to protect surfaces. The universal wedges feature a latching mechanism so you can preset and lock the required spacing thickness; they hold reliably and reduce the need for re-adjustment. All items are suitable for standard laminate and parquet installation tasks and are built for repeated use.

Suitable for

• Laying laminate flooring
• Installing engineered parquet and design flooring
• Pulling boards together near walls and under door frames
• Creating and maintaining an even expansion gap around the floor
• Squaring windows and doors and other alignment jobs

Key specifications

• Brand: Wolfcraft
• Model / MPN: WF6975000
• EAN: 4006885697508
• Kit contents: tapping block, pulling ledge (metal), 30 universal plastic wedges
• Colour: Grey
• Intended use: Laminate and parquet installation

How to use

Place the tapping block against the face of a plank and apply a measured hammer blow to the contact surface to close gaps without damaging the tongue-and-groove. For areas adjacent to walls, insert the pulling ledge into the gap between wall and board and tap it in the pulling direction until the row is aligned. Use the felt-protected underside to avoid surface damage. Combine the universal wedges and snap them together to preset the desired expansion gap, insert them around the perimeter of the room and adjust as needed. The latching mechanism will keep wedges at the selected thickness during installation.

Recommendations

Use a soft-faced hammer when tapping the block or pulling ledge to minimise marks. Check manufacturer recommendations for the required expansion gap for your specific flooring product and set the wedges accordingly. Store components dry and clean to maintain the felt pads and plastic parts in good condition.