Expansion anchor Fischer 567808 50 mm 90 pcs Green

The Fischer SX Plus Green expansion anchor (50 mm, pack of 90) is made from at least 50% renewable raw materials and is intended for reliable fixings in a variety of building materials including autoclaved aerated concrete, brick, concrete, gypsum fibre board and masonry. With a 6 mm diameter and matching drill hole size, this green anchor offers extended anchorage depth designed especially for hollow materials and plastered substrates.

Advantages

The SX Plus Green is produced with a minimum of 50% renewable raw materials, reducing the use of fossil plastics. Its 4-way expansion transmits forces effectively into solid and perforated building materials, delivering high holding values. Special fixing blades pre-fix the screw so it stays in place during positioning, which frees both hands during installation. The expansion-free plug neck prevents expansion forces acting on the surface while screwing, helping to protect tiles and plaster. A pronounced, flexible plug edge prevents the anchor from slipping deeper into the drill hole for secure installation.

Suitable for

• Autoclaved aerated concrete (AAC)
• Hollow building materials and perforated bricks
• Concrete, masonry and sand-lime brick
• Gypsum fibre board and plastered substrates
• Indoor fixings requiring pre-positioned or push-through installation

Key specifications

• Brand: FISCHER
• Model / MPN: 567808
• EAN: 4048962481341
• Anchor length: 50 mm
• Anchor diameter: 6 mm
• Pack quantity: 90 pieces
• Material content: ≥ 50% renewable raw materials

How to use

Drill a 6 mm hole to the required depth in the chosen substrate, clean the hole of drilling dust, and insert the SX Plus Green anchor either as a pre-positioned or push-through fixing depending on the application. Insert the screw; the fixing blades fold inward and hold the screw in place. Tighten the screw—the anchor will expand in four directions to create a secure hold. For overhead or overhead-like installations, rely on the pre-fixation feature to keep the screw engaged while you fasten.

Recommendations

Use a drill bit matching the anchor diameter (6 mm) and follow the substrate-specific recommended embedment depths. Do not exceed the manufacturer’s recommended tightening torque to avoid damage to the anchor or substrate. For applications in hollow or weak substrates, choose the longer anchorage depth variant as supplied to improve load distribution.