Eaton DILM17-10 Power Contactor, 3-Pole, 17 A, 690 V AC, Coil 42 V 50 Hz / 48 V 60 Hz, 1 NO Auxiliary, IP00, Black/White 277000

In industrial control panels and motor control centers, the Eaton DILM17-10 power contactor reliably switches three-phase motors and resistive loads. This 3-pole contactor is rated for 17 A at AC-3 and up to 690 V AC, making it suitable for a wide range of low-voltage switching applications. The coil accepts 42 V at 50 Hz or 48 V at 60 Hz, and one normally open auxiliary contact provides status feedback. With screw terminals and IP00 protection, it is intended for installation inside enclosures. The housing is black with white markings.

Key specifications

• Rated operational current (AC-3): 17 A
• Rated operational voltage: 690 V AC
• Coil voltage: 42 V AC (50 Hz) / 48 V AC (60 Hz)
• Number of poles: 3
• Auxiliary contacts: 1 NO
• Protection degree: IP00
• Mounting: DIN rail or screw
• Rated insulation voltage (Ui): 690 V
• Rated impulse withstand voltage (Uimp): 8 kV
• Motor rating at 400 V AC-3: 7.5 kW
• Electrical durability (AC-3): 1.5 million operations
• Mechanical durability: 10 million operations
• Operating temperature: -25 to +60 °C
• Terminal type: screw terminals
• Standards: IEC/EN 60947, UL, CSA

Why choose it

The DILM17-10 combines compact dimensions with proven switching performance. Its dual-frequency coil design allows use in both 50 Hz and 60 Hz networks without coil replacement. The auxiliary contact simplifies control circuit integration, and the robust construction ensures long service life in demanding industrial environments.

Ideal use cases

• Switching three-phase motors up to 7.5 kW at 400 V
• Control of resistive heating loads
• Motor control in conveyors, pumps, and fans
• Integration into control panels and motor starters

Good to know

The contactor is delivered with IP00 protection, meaning it must be installed in an enclosure that provides the required degree of protection against dust and moisture. Mounting is possible on standard 35 mm DIN rail or with screws. The coil terminals are clearly marked for easy wiring.