Eaton DILM15-10(24VDC)-PI Power Contactor, 3 NO Main Contacts, 1 NO Auxiliary, 24 V DC Coil, 15 A AC-3, 7.5 kW 199253

In industrial control systems, reliable switching of motors and other loads is critical. The Eaton DILM15-10(24VDC)-PI power contactor provides dependable three-pole switching with a 24 V DC coil, suitable for motor starting and control applications up to 7.5 kW at 400 V AC-3.

Who is it for

Electrical engineers, panel builders, and maintenance technicians who need a compact, DIN-rail mountable contactor for motor control, heating, lighting, and other industrial loads.

Main features

• 3-pole main contact configuration with 3 normally open (NO) contacts
• 1 normally open (NO) auxiliary contact for control and signaling
• 24 V DC coil voltage for low-voltage control circuits
• Rated operational current 15 A at AC-3, 400 V
• Rated operational power 7.5 kW at AC-3, 400 V
• Rated insulation voltage 690 V and impulse withstand voltage 6 kV
• Screw terminals for secure wiring
• DIN rail or screw mounting for flexible installation

Specifications

• Series: DILM
• Number of main poles: 3
• Main contact configuration: 3 NO
• Auxiliary contact configuration: 1 NO
• Coil voltage: 24 V DC
• Rated operational current (AC-3, 400 V): 15 A
• Rated operational current (AC-1, 690 V): 32 A
• Rated operational power (AC-3, 400 V): 7.5 kW
• Rated insulation voltage (Ui): 690 V
• Rated impulse withstand voltage (Uimp): 6 kV
• Mounting type: DIN rail / screw mounting
• Terminal type: screw terminals
• Operating temperature range: -25 to +60 °C
• Degree of protection: IP20
• Standards: IEC/EN 60947, VDE
• Electrical life (AC-3): >1.5 x 10^6 operations
• Mechanical life: >10 x 10^6 operations

Tips

Ensure the control voltage matches the 24 V DC coil rating. For motor loads, verify the AC-3 rating against the motor's full-load current. Mount on a standard 35 mm DIN rail or use screw mounting for secure installation.