Drill Bit Bosch SDS plus-7X 6.5mm 265mm

Drill Bit Bosch SDS plus-7X 6.5mm 265mm is a hammer drill bit designed for SDS plus rotary hammers. With a 6.5 mm diameter and 265 mm overall length, this single bit is built for drilling through reinforced concrete, cured concrete and hard stone. The tool features a Full Carbide Head and Bosch Carbide Technology for extended life and consistent performance under heavy use.

Advantages

The EXPERT SDS plus-7X delivers up to three times longer life than a standard drill bit thanks to an extremely durable tip made with Bosch Carbide Technology and a robust four-cutter Full Carbide Head that resists jamming on rebar. Bosch welding technology provides a highly resistant connection between tip and shaft to reduce breakage and wear during intensive drilling.

Suitable for

• Drilling holes in reinforced concrete for anchors and fixings
• Drilling in cured and hardened concrete
• Drilling in hard natural stone such as granite and gneiss

Key specifications

• Type: SDS plus hammer drill bit
• Diameter: 6.5 mm
• Overall length: 265 mm
• Head: Full Carbide Head (4-cutter)
• Manufacturer technology: Bosch Carbide Technology, Bosch welding technology
• MPN: 2608900080
• EAN: 4059952531533

How to use

Insert the SDS plus shank into the rotary hammer’s chuck until it locks. Select rotary hammer mode with hammering action suitable for concrete. Start drilling with steady pressure, allowing the bit to do the work; avoid excessive lateral force. When encountering rebar, continue with steady pressure— the four-cutter Full Carbide Head is designed to resist jamming. Withdraw the bit periodically to clear dust and maintain cooling during long holes.

Recommendations

Use appropriate personal protective equipment (safety glasses, dust mask and hearing protection). Match drill speed and hammer settings to material hardness, and use lubricant or flushing only if recommended by the tool manufacturer. Replace the bit when wear affects drilling accuracy or penetration rate.