Blind rivet GESIPA 1433472 Aluminium Steel Grey 6.5mm Head 3mm Tail 12mm Length

GESIPA 1433472 is a blind rivet made from an aluminium body with a steel mandrel and a grey finish. It has a dome head with a 6.5 mm head diameter, a 3 mm tail diameter and a total length of 12 mm. Supplied in packs of 500 pieces, this blind rivet is designed for permanent, non-removable fastenings where access is available from one side only.

Advantages

The aluminium-steel combination provides a balance of lightweight corrosion resistance from the aluminium body and high tensile strength from the steel mandrel. The dome head gives a neat, rounded finish on the visible side while the grey coating helps blend with painted or galvanized surfaces. Available in standard dimensions and in bulk packaging for consistent, efficient use.

Suitable for

• Sheet metal assembly and joining
• Panels and enclosures where access is one-sided
• Repair and maintenance tasks requiring permanent fastenings

Key specifications

• Brand: GESIPA
• Model / MPN: 6300170 (GESIPA 1433472)
• EAN: 4007081300179
• Material: Aluminium body, steel mandrel
• Finish: Grey
• Head type: Dome head
• Head diameter: 6.5 mm
• Tail diameter: 3 mm
• Length: 12 mm
• Pack quantity: 500 pcs

How to use

Drill a hole with the recommended diameter for a 3 mm tail, insert the blind rivet through the aligned workpieces, and position the dome head on the visible face. Use a compatible blind rivet tool to pull the mandrel until the rivet body deforms and clamps the materials. Break off the mandrel at the designed snap point and inspect the joint for correct setting.

Recommendations

For best results, match the rivet length and diameter to material thickness and hole size; ensure the rivet tool is suitable for 3 mm mandrels. Avoid using dissimilar metals without appropriate surface treatment to reduce risk of galvanic corrosion when used in corrosive environments.